Material
Nylon is a tough, versatile plastic. We 3D print it into strong, functional parts.
Overview
Nylon is a tough, versatile plastic. We 3D print it into strong, functional parts.
Nylon (polyamide, PA) is a tough plastic. 3D printing (SLS or MJF) makes strong, detailed parts without supports.
We build parts layer by layer from your digital file, with no tooling needed.
Shapes that are hard or impossible to machine or mold, ready in days.
Specifications
Typical reference values for Nylon (PA) through 3D printing. Final numbers can vary with grade and part shape.
| Property | Typical Value |
|---|---|
| Material type | Nylon (PA, polyamide) |
| Manufacturing process | 3D Printing (SLS/MJF) |
| Density | 1.01 g/cm³ |
| Tensile strength | 45–70 MPa |
| Service temperature | −40 to 120 °C |
| Standard finishes | Dyeing, bead blasting, polishing |
Values are typical reference data and may vary with grade, heat treatment, and part geometry. Tell us your needs and we will confirm exact specs.
Why Nylon
Resists impact and fatigue. Good for working parts.
Bends a little without breaking.
SLS/MJF prints freely, cutting cost.
Stands up to oils, fuels, and solvents.
Material Options
We stock common grades. Tell us your need and we will pick the right one.
The standard, tough, low-moisture grade.
More flexible, bio-based option.
Stiffer and stronger with glass fiber.
How It Works
From your file to a finished part in five clear steps. Start with a free quote.
Upload your STEP or STL file. Get a quote with free DFM feedback, usually within 24 hours.
Our engineers check wall thickness, overhangs, and supports. We suggest changes that cut cost and improve quality.
We print your part layer by layer with metal (SLM/DMLS) or plastic (SLS/MJF) technology.
We remove supports, then heat-treat, surface-finish, or color the part as needed.
We measure and inspect each part, then pack and ship worldwide with full tracking.
Applications
Strong parts that act like final ones.
Snap-fits and moving parts.
Custom factory aids.
Small batches without tooling.
Design Tips
New to this process? These simple rules help your part turn out well and cost less.
Keep walls thick enough to print and stay strong. Very thin walls may fail or warp.
Overhangs and bridges need supports. Design to reduce them and cut cost.
Tight tolerances cost more. Only specify them where the function needs them.
Finishes
The natural layered surface. Fastest and lowest cost.
A uniform matte finish that softens layer lines.
A smoother, brighter surface for looks or function.
Color or coating for metal or nylon parts.
Why YiguProto
We are a dedicated factory for 3D printing. Every file is reviewed by engineers before production. Every part is inspected before shipping. Your designs stay private with us.
FAQ