Material
Titanium is a strong, light, biocompatible metal. We 3D print it into parts nothing else can match.
Overview
Titanium is a strong, light, biocompatible metal. We 3D print it into parts nothing else can match.
Titanium (Ti-6Al-4V) is printed by metal 3D printing (SLM/EBM). It builds strong, light, corrosion-proof parts with complex shapes, ideal for medical and aerospace use.
We build parts layer by layer from your digital file, with no tooling needed.
Shapes that are hard or impossible to machine or mold, ready in days.
Specifications
Typical reference values for Titanium (Ti-6Al-4V) through 3D printing. Final numbers can vary with grade and part shape.
| Property | Typical Value |
|---|---|
| Material type | Titanium (Ti-6Al-4V) |
| Manufacturing process | 3D Printing (SLM/EBM) |
| Density | 4.43 g/cm³ |
| Tensile strength | 900–1100 MPa |
| Service temperature | up to 400 °C |
| Standard finishes | As printed, machining, polishing |
Values are typical reference data and may vary with grade, heat treatment, and part geometry. Tell us your needs and we will confirm exact specs.
Why Titanium
As strong as steel, but much lighter.
About half the weight of steel.
Fights rust and body fluids.
Safe inside the human body.
Material Options
We stock common grades. Tell us your need and we will pick the right one.
The standard, strong grade.
Softer, highly corrosion resistant.
Extra-pure for medical use.
How It Works
From your file to a finished part in five clear steps. Start with a free quote.
Upload your STEP or STL file. Get a quote with free DFM feedback, usually within 24 hours.
Our engineers check wall thickness, overhangs, and supports. We suggest changes that cut cost and improve quality.
We print your part layer by layer with metal (SLM/DMLS) or plastic (SLS/MJF) technology.
We remove supports, then heat-treat, surface-finish, or color the part as needed.
We measure and inspect each part, then pack and ship worldwide with full tracking.
Applications
Bone plates and dental parts.
Light, strong brackets and ducts.
High-performance, light parts.
Small batches without tooling.
Design Tips
New to this process? These simple rules help your part turn out well and cost less.
Keep walls thick enough to print and stay strong. Very thin walls may fail or warp.
Overhangs and bridges need supports. Design to reduce them and cut cost.
Tight tolerances cost more. Only specify them where the function needs them.
Finishes
The natural layered surface. Fastest and lowest cost.
A uniform matte finish that softens layer lines.
A smoother, brighter surface for looks or function.
Color or coating for metal or nylon parts.
Why YiguProto
We are a dedicated factory for 3D printing. Every file is reviewed by engineers before production. Every part is inspected before shipping. Your designs stay private with us.
FAQ