Material
PTFE is a non-stick, chemical-proof plastic. We machine it into seals and parts that resist everything.
Overview
PTFE is a non-stick, chemical-proof plastic. We machine it into seals and parts that resist everything.
PTFE, also called Teflon, is a fluoropolymer. It resists almost every chemical and has the lowest friction of any solid. We machine it with sharp tools for clean, precise parts.
Computer-controlled mills and lathes cut a solid block into a precise part.
Tight-tolerance parts for prototypes or production, finished to your drawing.
Specifications
Typical reference values for PTFE (Teflon) through cnc machining. Final numbers can vary with grade and part shape.
| Property | Typical Value |
|---|---|
| Material type | PTFE (Teflon / Fluoropolymer) |
| Manufacturing process | CNC Machining |
| Density | 2.15 g/cm³ |
| Tensile strength | 20–35 MPa |
| Service temperature | −200 to 260 °C |
| Standard finishes | As-machined, polishing |
Values are typical reference data and may vary with grade, heat treatment, and part geometry. Tell us your needs and we will confirm exact specs.
Why PTFE
Nothing sticks to its surface.
Fights almost all acids and solvents.
Slides smoothly without lube.
Works from −200 to 260 °C.
Material Options
We stock common grades. Tell us your need and we will pick the right one.
Pure grade. Best chemical resistance.
Stiffer and wears better.
Strong and heat conducting.
How It Works
From your file to a finished part in five clear steps. Start with a free quote.
Upload your STEP or STL file and drawings. Get a clear, factory-direct quote with free DFM feedback, usually within 24 hours.
Our engineers check wall thickness, tolerances, and features. We suggest changes that save cost and improve quality.
We cut your part from a solid block with mills and lathes in our machine shop.
We remove burrs, then apply the finish you need, such as polishing or plating.
We measure and inspect each part, then pack and ship worldwide with full tracking.
Applications
Leak-free parts for harsh fluids.
Low-friction, dry-running parts.
Beakers, liners, and fittings.
Stable parts for high heat.
Design Tips
New to this process? These simple rules help your part turn out well and cost less.
Keep walls thick enough to stay rigid. Thin areas can vibrate and warp during cutting.
Tight tolerances cost more. Only specify them where the function needs them.
Small chamfers and radii help tools last longer and parts look cleaner.
Finishes
The natural milled surface. Good for most functional parts.
A smoother, brighter surface for looks or low friction.
Nickel, chrome, or other coatings for corrosion or wear protection.
A chemical treatment that boosts corrosion resistance on some metals.
Why YiguProto
We are a dedicated factory for cnc machining. Every file is reviewed by engineers before production. Every part is inspected before shipping. Your designs stay private with us.
FAQ