Material
PBT is a rigid, heat-resistant plastic. We mold it into stable, electrical-safe parts.
Overview
PBT is a rigid, heat-resistant plastic. We mold it into stable, electrical-safe parts.
PBT (Polybutylene Terephthalate) is a rigid engineering plastic. It resists heat, chemicals, and electricity.
We melt plastic resin and inject it into a steel mold to form identical parts.
High-volume parts with consistent size and finish, made to your drawing.
Specifications
Typical reference values for PBT through injection molding. Final numbers can vary with grade and part shape.
| Property | Typical Value |
|---|---|
| Material type | PBT (polyester) |
| Manufacturing process | Injection Molding |
| Density | 1.31 g/cm³ |
| Tensile strength | 50–60 MPa |
| Service temperature | −40 to 120 °C |
| Standard finishes | As molded, painting, texturing |
Values are typical reference data and may vary with grade, heat treatment, and part geometry. Tell us your needs and we will confirm exact specs.
Why PBT
Holds shape with low warpage.
Good for electrical and under-hood use.
Blocks current safely.
Stands up to solvents and oils.
Material Options
We stock common grades. Tell us your need and we will pick the right one.
The standard, low-cost grade.
Stiffer and stronger.
Safer for electronics housings.
How It Works
From your file to a finished part in five clear steps. Start with a free quote.
Upload your 3D file and drawings. Get a quote with free DFM feedback, usually within 24 hours.
Our engineers check wall thickness, draft, and gates. We suggest changes that cut cost.
We design and build the steel mold that shapes your part.
We melt the resin and inject it into the mold, then cool and eject the part.
We check dimensions and quality, then pack and ship worldwide.
Applications
Electrical and electronics enclosures.
Under-hood and sensor parts.
Insulating, stable components.
Heat- and chemical-safe components.
Design Tips
New to this process? These simple rules help your part turn out well and cost less.
Use a steady wall thickness so the part fills evenly and warps less.
A small draft (1–2°) on vertical faces helps the part release from the mold.
Plastics shrink as they cool. We size the mold to land on your final dimensions.
Finishes
The natural molded surface straight from the tool. Lowest cost.
A custom color coat for branding or looks.
A matte or patterned surface for grip or style.
A glossy protective layer for a premium look.
Why YiguProto
We are a dedicated factory for injection molding. Every file is reviewed by engineers before production. Every part is inspected before shipping. Your designs stay private with us.
FAQ