Surface finish
Teflon Coating for CNC & Molded Parts
Teflon (PTFE) coating is non-stick and low-friction. It keeps parts clean and easy to release.
- Non-stick, low-friction surface.
- Resists heat, chemicals, and build-up.
Surface finish
Teflon (PTFE) coating is non-stick and low-friction. It keeps parts clean and easy to release.
What it is
Teflon coating is a layer of PTFE (polytetrafluoroethylene) applied to a part. It is famous for non-stick pans, but in industry it is used where things must slide, not stick, or stay clean. The coating resists heat, chemicals, and abrasion.
How it works
Clean & blast
We clean and often blast for adhesion.
Prime
A primer or bonding layer is applied.
Apply Teflon
The PTFE coating is sprayed or dipped on.
Cure
Heat fuses the coating into a solid film.
Why choose it
Parts slide and release easily.
Resists build-up of adhesives and residues.
Stable at high operating temperatures.
Withstands many solvents and acids.
Ideal for molds and food contact.
Typical specs
| Specification | Typical range / value | Notes |
|---|---|---|
| Material | PTFE (Teflon) with primer | |
| Thickness | 10 – 50 µm | |
| Temp range | Up to ~260 °C service | |
| Base materials | Steel, aluminium, stainless, some plastics |
Best applications
Non-stick cavities and cores.
Conveyors and baking tools.
Low-friction moving parts.
Reduced stick and wear.
Materials
We apply Teflon Coating to the materials below. Not sure if your material qualifies? Our engineers will confirm it for free.
Our solution
We apply Teflon (PTFE) coatings for non-stick, low-friction, and release needs. We add a primer and cure for strong bonding.
Design tips
Best where things must not stick.
Pick a grade rated for your heat.
Mark areas to leave bare.
FAQ